Logo Search packages:      
Sourcecode: linux-fsl-imx51 version File versions  Download package

micro9.c

/*
 *  linux/arch/arm/mach-ep93xx/micro9.c
 *
 * Copyright (C) 2006 Contec Steuerungstechnik & Automation GmbH
 *                   Manfred Gruber <manfred.gruber@contec.at>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/mtd/physmap.h>

#include <mach/hardware.h>

#include <asm/mach/arch.h>
#include <asm/mach-types.h>

static struct ep93xx_eth_data micro9_eth_data = {
      .phy_id           = 0x1f,
};

static void __init micro9_init(void)
{
      ep93xx_register_eth(&micro9_eth_data, 1);
}

/*
 * Micro9-H
 */
#ifdef CONFIG_MACH_MICRO9H
static struct physmap_flash_data micro9h_flash_data = {
      .width            = 4,
};

static struct resource micro9h_flash_resource = {
      .start            = EP93XX_CS1_PHYS_BASE,
      .end        = EP93XX_CS1_PHYS_BASE + SZ_64M - 1,
      .flags            = IORESOURCE_MEM,
};

static struct platform_device micro9h_flash = {
      .name       = "physmap-flash",
      .id         = 0,
      .dev        = {
            .platform_data    = &micro9h_flash_data,
      },
      .num_resources    = 1,
      .resource   = &micro9h_flash_resource,
};

static void __init micro9h_init(void)
{
      platform_device_register(&micro9h_flash);
}

static void __init micro9h_init_machine(void)
{
      ep93xx_init_devices();
      micro9_init();
      micro9h_init();
}

MACHINE_START(MICRO9, "Contec Hypercontrol Micro9-H")
      /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
      .phys_io    = EP93XX_APB_PHYS_BASE,
      .io_pg_offst      = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
      .boot_params      = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
      .map_io           = ep93xx_map_io,
      .init_irq   = ep93xx_init_irq,
      .timer            = &ep93xx_timer,
      .init_machine     = micro9h_init_machine,
MACHINE_END
#endif

/*
 * Micro9-M
 */
#ifdef CONFIG_MACH_MICRO9M
static void __init micro9m_init_machine(void)
{
      ep93xx_init_devices();
      micro9_init();
}

MACHINE_START(MICRO9M, "Contec Hypercontrol Micro9-M")
      /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
      .phys_io    = EP93XX_APB_PHYS_BASE,
      .io_pg_offst      = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
      .boot_params      = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
      .map_io           = ep93xx_map_io,
      .init_irq   = ep93xx_init_irq,
      .timer            = &ep93xx_timer,
      .init_machine     = micro9m_init_machine,
MACHINE_END
#endif

/*
 * Micro9-L
 */
#ifdef CONFIG_MACH_MICRO9L
static void __init micro9l_init_machine(void)
{
      ep93xx_init_devices();
      micro9_init();
}

MACHINE_START(MICRO9L, "Contec Hypercontrol Micro9-L")
      /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
      .phys_io    = EP93XX_APB_PHYS_BASE,
      .io_pg_offst      = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
      .boot_params      = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
      .map_io           = ep93xx_map_io,
      .init_irq   = ep93xx_init_irq,
      .timer            = &ep93xx_timer,
      .init_machine     = micro9l_init_machine,
MACHINE_END
#endif


Generated by  Doxygen 1.6.0   Back to index